聯系我們
服務熱線
0595-22918005
總部地址: 福建省泉州市東海大街398號
當前位置:首頁  學院簡介  師資隊伍
邱夷平
瀏覽:754 發布日期:2018-05-02



一、個人基本簡介

  1.個人介紹:邱夷平,男,1955年出生,專業:紡織材料,學歷:研究生、學位:博士、職稱:教授;

  2.承擔的社會職務

   i.國內外期刊的審稿人或編委

    (1)Textile Research Journal

    (2)Journal of Industrial Textiles

    (3)Journal of Adhesion Science and Technology

    (4)Review of Adhesion and Adhesives

    (5)Journal of Fiber Bioengineering and Informatics

    (6)International Journal of Textile Science and Technology

    (7)紡織學報

    ii.協會或學會的委員與負責人

    (1)美國尖端材料技術學會(SAMPE)上海分會理事長

    (2)長寧區僑聯副主席

    (3)長寧區政協委員

    (4)上海市僑界知識分子聯誼會成員

    iii.學?;驅W院的職務

    (1)泉州師范學院紡織與服裝學院院長

    (2)紡織材料與紡織品設計國家二級重點學科帶頭人

    (3)紡織面料教育部重點實驗室學術委員會主任

    (4)紡織學院博士后流動站站長

    (5)東華大學校學術委員會委員

    (6)東華大學校教學委員會委員

    (7)東華大學校研究部專家咨詢小組成員

3.個人的代表性成果:

    i.教學成果

    (1)《紡織材料學》國家級教學團隊負責人

    (2)《紡織材料學》國家級雙語示范課程負責人

    (3)《紡織材料學》國家級精品課程項目,排名第二

    (4)《紡織結構復合材料》上海市全英語示范課程負責人

    (5)2012年 上海市大學生暑期社會實踐活動優秀指導老師

    (6)2012年 東華大學大學生暑期社會實踐“優秀指導老師”

    (7)2012年 東華大學大學生創新活動項目優秀指導老師

    (8)2006、2008、2011年 東華大學十佳“我心目中的好老師”

    (9)2011年 上海市大學生暑期社會實踐活動優秀指導教師

    (10)2009年 第十一屆上海市大學生課外學術科技作品競賽暨第十一屆“挑戰杯”上海市選拔賽優秀指導教師

    (11)2013年第十二屆上海市大學生課外學術科技作品競賽暨第十二屆“挑戰杯”上海市選拔賽優秀指導教師

    ii.指導學生獲獎情況

    (1)2013年,張琳婕,周騫,馬若陽,旁莎莎,婁路陽,焦文玲,全國大學生課外科技活動“挑戰杯”入圍決賽項目:新型三維正交結構防彈防刺織物的開發.

    (2)2012年 第二屆援助新疆紡織產業實踐項目,榮獲2012年上海市大學生暑期社會實踐活動最佳項目獎

    (3)2012年 榮獲2012年東華大學大學生暑期社會實踐“最佳項目獎”.

    (4)2011年,周舟等,全國大學生課外科技活動“挑戰杯”二等獎:一種用于高性能熱塑性復合材料的麻纖維表面疏水化處理技術

    (5)2010年 溫穎、付堃、李冉星、邱夷平(指導老師),第六屆“上汽教育杯”上海市高校學生科技創新作品展示評優活動二等獎:乙二醇預處理對常壓等離子體處理高強聚乙烯纖維效果的影響

    (6)2009年,高天琪、周沁、陳余,全國大學生課外科技活動“挑戰杯”一等獎:基于三維正交織物的新型飛機發動機包容環.

    (7)2009年溫穎、李冉星、蔡芳、付堃,第十一屆上海市大學生課外學術科技作品競賽暨第十一屆“挑戰杯”上海市選拔賽二等獎.

    (8)2009年,溫穎等,全國大學生課外科技活動“挑戰杯”三等獎.

    (9)2008年 王春霞、徐荷瀾、滕偉華,上海市高校學生創造發明“科技創業杯”三等獎:水分對常壓等離子體處理羊毛織物防氈縮效果的影響.

    (10)2007年,姚瀾、徐荷瀾、許福軍,導師:邱夷平,上海市科創杯一等獎:基于三維正交機織物的共形承載微帶天線結構的研究.


二、教學與主講課程:

    1.本科生課程:《紡織材料學》(全英語)、《紡織結構復合材料》(全英語)、《科研方法入門》

    2.研究生課程:《纖維科學》(全英語)、《紡織復合材料》(全英語)、《科研方法》(全英語)


三、學習及工作經歷:

19782月至19822月,就讀于浙江絲綢工學院絲綢工程專業,獲學士學位;

19859月至19881月,就讀于美國奧本大學紡織科學專業,獲碩士學位;

19881月至19921月,就讀于美國康奈爾大學纖維科學專業,獲博士學位;

19921月至19927月,美國康奈爾大學,做博士后;

19928月至19947月,美國麻省理工學院,做博士后;

19948月至19956月,美國Timberland公司,任研發部材料科學家;

19958月至19967月,美國堪薩斯州立大學,任助教授;

19968月至20037月,美國北卡羅來納州立大學,任助教授;

20038月至今,東華大學,任校特聘教授、博士生導師;


四、研究方向:

    1.三維紡織結構制作技術和應用

    2.三維紡織結構復合材料性能研究

    3.三維紡織結構微帶天線設計與性能

    4.纖維表面與界面研究

    5.納米纖維與納米材料開發和應用

    6.綠色復合材料研究


五、榮譽及獲獎情況:

    2007年上海市科教系統“比翼雙飛模范佳侶”

    2009上海市歸僑僑眷先進個人

    2009首屆上海市華僑華人專業人士“杰出創業獎”

    2008年獲寶鋼優秀教師獎

    2007年入選上海市領軍人才“地方隊”后備隊

    2009年上海市教學成果獎一等獎“紡織工程專業“三位一體”學生創新能力培育體系的改革和實踐”排名第三;

    2011年 中國紡織工業協會紡織高等教育教學成果一等獎“大眾化教育背景下分層次培養高素質紡織專業人才的改革與實踐”排名第一;

    2010年 中國紡織工業協會紡織高等教育教學成果二等獎“本科生畢業論文培養模式探討與實踐”排名第一;

    2013年,東華大學 “優秀教學育人獎”


六、近年來承擔的科研項目:

    1.國家863計劃項目“三維機織物為基礎的微帶天線系統結構設計和性能研究,”項目負責人,200712月-201011月。

    2.國防科工委基礎科研項目,項目負責人,(秘密級)20061月-200712月。

    3.上海市浦江人才計劃項目“低成本超厚三維正交復合材料的織造和成型工藝研究”,項目負責人,20051月-200712月。

    4.國防科工委基礎科研項目,項目參與人,(秘密級)20061月-200812月。

    5.教育部長江學者創新團隊子項目“常壓等離子體表面處理技術”,課題負責人, 20061-200712月。

    6.十二五國家科技支撐計劃子項目“基于三維機織物和三維機織復合材料的裝備研究” 項目參與人,20131-201412

    7.國家自然科學基金重點項目“復合材料三維織造成形制造技術及設備基礎研究”子項目,項目參與人,20121-201412


七、發表論著


1.近5年發表論文

(1)Liang, Y., Cheng, S., Zhao, J., Zhang, C., Sun, S., Zhou, N., Qiu, Y., Zhang, X., Heat treatment of electrospun Polyvinylidene fluoride fibrous membrane separators for rechargeable lithium-ion batteries, Journal of Power Sources, 240:204-211(2013)

(2)*Zhao, F., Jiang, Q., Chen, H., Xue, G. and Qiu, Y. Three dimensional woven fabrics as filter media in membrane bioreactor for wastewater treatment, Journal of Materials Science, 48:7869–7874 (2013)

(3)Liu, W., Zhao, H., Yong, Z., Xu, G., Wang, X., Xu, F., Hui, D., Qiu, Y. Improving Mechanical and Electrical Properties of Oriented Polymer-free Multi-walled Carbon Nanotube Paper by Spraying while Winding, Composites Part B. Engineering, 53:342–346 (2013)

(4)Yao, L., Rong, Q., Shan, Z., Qiu, Y. Static and bending fatigue properties of ultra-thick 3d orthogonal woven composites. Journal of Composite Materials, 47(5): 569–577 (2013)

(5)Zhou, N., Yao, L., Liang, Y., Yu, B., Ye, M., Shan, Z., Qiu, Y., Improvement of mechanical properties of ramie/poly (lactic acid) (PLA) laminated composites using a cyclic load pre-treatment method, Industrial Crops and Products, 45:94-99 (2013)

(6)Jiang, Q., Li, Y., Xie, J., Sun, Ji., Yao, L., Hui, D., Qiu, Y. Plasma functionalization of bucky paper and its composite with phenylethynyl-terminated polyimide, Composites Part B, 45(1): 1275-1281 (2013)

(7)Rhee, K.Y., Park, S.J., Hui, D., Qiu, Y. Effect of oxygen plasma-treated carbon fibers on the tribological behavior of oil-absorbed carbon/epoxy woven composites, Composites Part B. Engineering. 43: 2395–2399 (2012)

(8)Zhou, N., Yu, B., Sun, J., Yao, L. Qiu, Y., Influence of chemical treatments on the interfacial properties of ramie fiber reinforced poly (lactic acid) (PLA) composites, Journal of Biobased Materials and Bioenergy, 6: 564-568 (2012)

(9)Zhang, R., Pan, X., Jiang, M., Peng, S., Qiu, Y., Influence of atmospheric pressure plasma treatment on surface properties of PBO fiber, Applied Surface Science. 261: 147– 154 (2012)

(10)Yao, L., Wang, X., Xu, F., Jiang, M., Zhou, D., and Qiu, Y. Effect of wire space and weaving pattern on performance of microstrip antennas integrated in the three dimensional orthogonal woven composites applied composites materials. Applied Composite Materials. 19 (1): 21-30 (2012).

(11)Wang, X., Yao, L., Zhou, D., Qiu, Y. Design and characterization of conformal microstrip antennas integrated into 3d orthogonal woven fabrics. Journal of Engineered Fibers and Fabrics. 7(2): 76-80 (2012)

(12)Ji, F., Hong, Y., Yao, L., Peng, S., Qiu, Y. Effect of glycerol coating on the atmospheric pressure plasma treatment of UHMPE fibers. Journal of Adhesion Science and Technology. 26(1-3): 289-301 (2012)

(13)Li, Y., Yao, L., Ji, F., Peng, S., Gao, Z., Sun, S., Qiu, Y. Influence of moisture on effectiveness of plasma treatments of polymer surfaces. Journal of Adhesion Science and Technology, 26:1123-1139 (2012)

(14)Li, X., and Qiu, Y. The effect of plasma pre-treatment on NaHCO3 desizing of blended sizes on cotton fabrics. Applied Surface Science. 258(11): 4939–4944 (2012)

(15)Zhou, Z., Wang, J., Huang, X., Zhang, L., Moyo, S., Sun, S., Qiu, Y. Influence of absorbed moisture on surface hydrophobization of ethanol pretreated and plasma treated ramie fibers. Applied Surface Science. 258:4411–4416  (2012)

(16)Liu, W., Zhao, H., Inoue, Y., Wang, X., Bradford, P.D., Kim, H., Qiu, Y., Zhu, Y. Poly(vinyl alcohol) reinforced with large-diameter carbon nanotubes via spray winding, Composite Part A : Applied Science and Manufacturing, 43:587-592 (2012)

(17)Li, X., Lin, J. and Qiu, Y. Influence of He/O2 atmospheric pressure plasma jet treatment on subsequent wet desizing of polyacrylate on PET fabrics, Applied Surface Science, 258:2332-2338 (2012)  

(18)Wang, C. Qiu, Y. Study on wettability improvement and its uniformity of wool fabric treated by atmospheric pressure plasma jet, Journal of Applied Polymer Science. 123(2): 1000-1006 (2012)

(19)Xu, F., Yao, L. Wang, X. Qiu, Y. Effect of conductive yarn crimp in radiation patch of 3d integrated microstrip antenna on its performance. Composites Part B. Engineering. 43:465-470 (2012)

(20)Sun, S. and Qiu, Y. Influence of moisture on wettability and sizing properties of raw cotton yarns treated with He/O2 atmospheric pressure plasma jet, Surface & Coatings Technology, 206:2281-2286 (2011)

(21)Tian, L., Nie, H., Chattertonc, N.P., Branford-Whitec, C.J., Qiu, Y., Zhu, L. Helium/oxygen atmospheric pressure plasma jet treatment for hydrophilicity improvement of grey cotton knitted fabric, Applied Surface Science, 257(16): 7113–7118 (2011)

(22)Zhao, Y., Zhang, C., Shao, X. Wang, Y. Qiu, Y. The influence of atmospheric plasma treatment on carbon fiber/matrix interfacial adhesion. Journal of Adhesion Science Technology. 25:2897-2908 (2011)

(23)Liang, Y., Lin, Z., Qiu Y. Zhang, X. Fabrication and characterization of LATP / PAN composite fiber-based membrane lithium-ion battery separators. Electrochimica Acta. 56:6474-6480 (2011)

(24)Gao, Z. Sun, S., Peng, S., Yao, L., Qiu, Y. The surface modification of nylon 6 films treated with he/o2 atmospheric pressure plasma jet, Journal of Applied Polymer Science. 120: 2201–2206 (2011)

(25)Xie, J., Xin, D., Cao, H., Wang, C., Zhao, Y., Yao, L., Ji, F., Qiu, Y. Improving carbon fiber adhesion to polyimide with atmospheric pressure plasma treatment, Surface & Coatings Technology. 206: 191-201 (2011)

(26)Sun, Ji. Yao, L., Sun, S., Qiu, Y. ESR study of atmospheric pressure plasma jet irradiated Kevlar 49 fibers, Surface & Coatings Technology. 205: 5312–5317 (2011)

(27)Liu, W.,  Zhang, X., Xu, G., Bradford, P. D., Wang, X., Zhao, H. Zhang, Y., Jia, Q., Yuan, F. G., Li, Q., Qiu, Y., Zhu, Y. Producing superior composites by winding carbon nanotubes onto a mandrel under a poly(vinyl alcohol) spray. Carbon. 49: 4786-4790 (2011)

(28)Xu, F., Yao, L., Zhao, D., Jiang, M., Qiu, Y. The effects of the resin layer in the patch structure to the antenna performance of a three dimensional integrated microstrip antenna, Journal of Composite Materials, 45(15): 1627 - 1635 (2011)

(29)Liang, Y., Ji, L., Guo, B., Lin, Z., Yao, Y., Li, Y., Alcoutlabi, M., Qiu, Y., Zhang, X. Preparation and electrochemical characterization of ionic-conducting lithium lanthanum titanate oxide/polyacrylonitrile submicron composite fiber-based lithium-ion battery separators, Journal of Power Sources. 196: 436-441. (2011)

(30)Zhou, Z., Liu, X., Hu, B., Wang, J., Xin. D., Sun, J., Yao, L., Qiu, Y. Hydrophobic atmospheric pressure plasma treatment of ramie fibers with ethanol pretreatment. Surface & Coatings Technology. 205: 4205–4210 (2011)

(31)Yao, L., Jiang, M., Zhou, D., Xu, F., Zhao, D., Zhang, W., Zhou, N., Jiang, Q., Qiu, Y. Fabrication and characterization of microstrip array antennas integrated in the three dimensional orthogonal woven composite, Composites Part B. 42:885-890 (2011)

(32)Sun, J. Yao, L. Sun, S. Gao, Z. Qiu. Y. Effect of storage condition and aging on acrylic acid inverse emulsion surface-grafting polymerization of PET films initiated by atmospheric pressure plasmas. Surface & Coatings Technology. 205: 2799–2805 (2011)

(33)Sun, S., Sun, J., Yao, L. Qiu, Y. Wettability and sizing property improvement of raw cotton yarns treated with He/O2 atmospheric pressure plasma jet. Applied Surface Science, 257: 2377–2382 (2011)

(34)Du, C., Zhong, S., Yao, L., Qiu, Y., Four element textile array antenna on three dimensional orthogonal woven composites. Microwave and Optical Technology Letters, 52(11): 2487-2488. (2010)

(35)Zhang, Y., Wu, H., Qiu, Y., Morphology and properties of hybrid composites based on polypropylene/polylactic acid blend and bamboo fiber. Bioresource Technology, 101(20): 7944-7950. (2010)

(36)Wang C. X.; Du M.; Qiu Y. P. Influence of pore size on penetration of surface modification into woven fabric treated with atmospheric pressure plasma jet, Surface & Coatings Technology, 205(3):909-914 (2010)

(37)Xu, F., Yao, L., Zhao, D. Zhao, L., Jiang, M. Qiu, Y. Performance and Impact Damage of a Three Dimensionally Integrated Microstrip Feeding Antenna Structure, Composite Structures. 93: 193–197 (2010)

(38)Sun, S., Gao, Z. Peng, S., Yao, L., Wang, C., Qiu, Y. Surface modification of PET films by atmospheric pressure plasma induced acrylic acid inverse emulsion graft polymerization, Surface & Coatings Technology. 204: 4101–4106 (2010)

(39)Peng, S., Liu, X., Sun, S., Gao, Z., Yao, L., Qiu, Y.  Influence of absorbed moisture on desizing of poly(vinyl alcohol) on cotton fabrics during atmospheric pressure plasma jet treatment, Applied Surface Science. 256: 4103–4108 (2010)

(40)Wen, Y. Li, R., Cai, F. Fu, K. Peng, S. Jiang, Q. Yao, L. Wang, C. Qiu, Y. Influence of ethylene glycol pretreatment on effectiveness of atmospheric pressure plasma treatment of polyethylene fibers, Applied Surface Science. 256: 3253–3258 (2010)

(41)Peng, S. Gao, Z. Sun, S., Yao, L., Wang, C., Qiu, Y. Influence of absorbed moisture on solubility of poly(vinyl alcohol) film during atmospheric pressure plasma jet treatment, Surface & Coatings Technology. 204:1222–1228 (2010)

(42)Gao, Z., Peng, S., Sun, J., Yao, L., Qiu, Y. The influence of moisture on atmospheric pressure plasma etching of PA6 films. Current Applied Physics. 10:230-234 (2010)

(43)Zhang, Y., Zhu, H., Huang, J., Zou, J., Wu, H., Qiu, Y.,  Effects of oxygen plasma treatment on tensile deformation of nano-SiO(2) sol-gel coating ultra-high molecular weight polyethylene filaments. Acta Physica Sinica, 58(6): S292-S297. (2009)

(44)Zhang, Y., Zhu, H., Wu, H., Qiu, Y., Effects of helium plasma treatment on tensile behaviour of nano-SiO(2) sol-gel coating T300 carbon fiber. Acta Physica Sinica, 58(6): S298-S305. (2009)

(45)Gao, Z., Peng, S., Sun, J., Yao, L., Qiu, Y. Surface modification of polyamide 6 film by He/CF4 plasma using atmospheric pressure plasma jet. Applied Surface Science. 256: 1496–1501  (2009)

(46)Yao, L. Wang, X. Xu, F. Zhao, D., Jiang, M. Qiu, Y. Fabrication and impact performance of three dimensionally integrated microstrip antennas with microstrip feeding and co-axial feeding, Smart Materials and Structures.18:095034 (2009).

(47)Peng, S. Gao, Z. Sun, J. Yao, L. Qiu, Y. Influence of argon/oxygen atmospheric dielectric-barrier discharge treatment on desizing and scouring of poly(vinyl alcohol) on cotton fabrics, Applied Surface Science. 255: 9458–9462 (2009).

(48)Xu, H., Peng, S., Wang, C., Yao, L., Sun, J., Ji, F. Qiu, Y. Influence of Absorbed Moisture on Anti-Felting Property of Wool Treated with Atmospheric Pressure Plasma. Journal of Applied Polymer Science. 113(6): 3687-3692 (2009).

(49)Gao, Z., Peng, S., Sun, J., Yao, L., Qiu, Y. Influence of processing parameters on atmospheric pressure plasma etching of polyamide 6 film. Applied Surface Science. 255: 7683–7688 (2009)

(50)Yao, L. and Qiu, Y., Microstrip antennas integrated in three dimensional orthogonal woven composites. Composites Science and Technology. 69: 1004–1008 (2009)

(51)*Jiang, Q. Li, R. Sun, J. Wang, C. Peng, S., Ji, F. Yao, L. Qiu, Y. Influence of Ethanol Pretreatment on Effectiveness of Atmospheric Pressure Plasma Treatment of Polyethylene Fibers. Surface & Coatings Technology. 203: 1604–1608  (2009)


2.近三年獲得授權發明和實用新型專利

(1)姚 瀾;邱夷平,專利名稱:構成基于三維正交機織物的共形承載微帶天線結構的方法

(2)*張 坤;高天琪;陳 余;周 沁;趙 達;蔣牧文;姚 瀾;紀 峰;張迎晨;邱夷平,專利名稱:一種發動機壓氣機包容環的織造方法

(3)許福軍;邱夷平;姚瀾,專利名稱:具有正交結構與平紋結構的三維機織物的制備方法

(4)邱夷平;蔣牧文;姚瀾;周冬春;趙達;張坤;張文文;吳昊;姜茜;周楠婷,專利名稱: 基于三維正交機織物的共形承載微帶陣列天線的織造方法

(5)許福軍;邱夷平;姚瀾,專利名稱:一種無樹脂覆蓋的三維機織物共形承載微帶天線的模塑成型方法

(6)許福軍;邱夷平;姚瀾,專利名稱:一種無樹脂覆蓋的三維正交機織復合材料的模塑成型方法

(7)周冬春;趙達;姚瀾;張文文;吳昊;蔣牧文;張坤;周楠婷;姜茜;張博文;羅瑞;邱夷平,專利名稱:聚四氟乙烯基三維正交復合材料的制備方法

(8)張迎晨;朱海燕;吳紅艷;邱夷平,專利名稱:蒙脫土/聚丙烯/聚乳酸復合纖維材料及其制備方法

(9)張迎晨;秦 翊;吳紅艷;邱夷平,專利名稱:納米氧化鋅/聚丙烯/聚乳酸復合纖維材料及其制備方法

(10)張迎晨;吳紅艷;邱夷平,專利名稱:等離子體處理涂覆碳納米管溶膠玄武巖纖維表面改性方法

(11)張迎晨;鄒 靜;吳紅艷;邱夷平,專利名稱:碳納米管/聚丙烯/聚乳酸復合纖維材料及其制備方法

(12)張迎晨;吳紅艷;邱夷平,專利名稱:等離子體處理涂覆納米溶膠的碳纖維表面改性的方法

(13)張迎晨;鄒 靜;吳紅艷;邱夷平,專利名稱:等離子體處理涂覆納米二氧化硅的碳纖維表面改性的方法   

(14)張迎晨;朱海燕;吳紅艷;邱夷平,專利名稱:等離子體處理涂覆納米二氧化硅溶膠的Vectran纖維表面改性的方法   

(15)*張迎晨;吳紅艷;邱夷平,專利名稱:金屬氧化物納米粉體大氣壓常溫等離子體改性處理方法   

(16)發明人:張迎晨;黃婧南;邱夷平,專利名稱:等離子體納米二氧化鈦/聚丙烯/聚乳酸及其制備方法   

(17)章倩 邱夷平 房曉萌 陸春紅 姚一舟 李凌晨 章悅庭,專利名稱:一種三維正交機織麻織物增強聚丙烯復合材料

(18)張迎晨;吳紅艷;邱夷平,專利名稱:等離子體處理納米溶膠超高分子量聚乙烯纖維改性的方法

(19)張迎晨;吳紅艷;邱夷平,專利名稱:等離子體處理納米溶膠Vectran纖維改性的方法   

(20)張迎晨;吳紅艷;邱夷平,專利名稱:等離子體處理超高分子量聚乙烯纖維改性的方法

(21)張迎晨;秦 翊;吳紅艷;邱夷平,專利名稱:等離子體處理納米溶膠凱夫拉纖維改性的方法

(22)章倩,劉萬軍,錢浩,何源,蔣慧,郁崇文,章悅庭,邱夷平,專利名稱:實驗室用多功能微型脫膠機



八、國際交流與合作

  1. 美國機械工程師學會(ASME)紡織工程分會主席(2004年)

  2. 北卡州立大學紡織工程、化學與科學系科學顧問委員會委員

  3. 北卡羅來納州立大學機械與航空工程系客座教授(2003 – 2006年)

  4. 美國尖端材料學會(SAMPE)會員、美國纖維學會會員、美國機械工程師學會會員


九、聯系信息

   email:    [email protected]

   電話:+86-21-67792744



深圳二手车指标赚钱 快乐8玩法价绍中奖 赛车pk10 新疆11选5前三直选遗漏 财通股票融资利息一般多少 十一选五最准的杀一码 江西快3开奖结果及走势图查询 河南体彩481开奖记录 好用的股票配资平台 内蒙古11选5手机版 云南时时彩最新开奖结果查询